Posted on: January 7, 2016 Posted by: rwibowo Comments: 0

Even though all TVs and media units come with required cables by default, the quality of those cables sometimes leaves room for the improvement. So, it is often better to invest into your own cables to enjoy richer sound and video without any breakups or frequency hindrances. tv_stand_banner_november-min

Cable choosing tips

1. Measure. Well, the first and the obvious thing to do is to measure exactly how much cable length you need. A lot of homeowners go for longer cables just in case they will move furniture around in the future. Reasonable as it sounds, the actual moving around hardly ever happens in real life. In reality, going for a longer cable results in wire tangle, so the best thing to do is to go for the length you need right now. On the off chance that you will move furniture, you can buy a longer one later — cables are not the most expensive objects, after all.
2. Prefer screw on connectors to push on ones. Push on connectors are the primary reasons for breakups, so make sure that you are going for a cable with screw on ends. They will take just a minute longer to connect, but will give you a chance to enjoy break free TV watching experience.
3. Pressure fitted cable ends are of higher quality than molded ones. Pressure fitted cable ends help to avoid radio frequency breaks, which ensures better audio and video. Molded ones, on the other hand, are of the lower quality and are far less durable.
4. Any material goes as long as the cable is RG-6 rated. When you choose TV cable for media units, you will see that there are plenty of materials to choose from: copper, silver, platinum, and gold are only the most common ones. Good news is that you do not have to bother about the actual material as long as the TV cable is RG-6 rated.
5. Quad shielded cables are the most durable ones. The final aspect to pay attention to is quad shielding. It ensures stronger signal and greater cable durability.

Ideas on avoiding wire tangle

Obviously, the first tip on avoiding wire tangle behind your TV is to choose shorter cables. If you are using a lot of different media units, another idea on how to choose TV cable to avoid mess and tangle is go with differently coloured wires. This is a simply functional piece of advice that will help to find the right outlets sooner.

You should also remember that the vast majority of TV stands can hide wires, so the least thing you can do when you choose TV cable for the TV is to take care of the power outlets. Make sure that there are enough outlets for each of your media units.

Finally, note that an adjustable TV mount is another great example of a furniture unit that can hide all of the cables. If you go with TV brackets, though, make sure the power outlet remains behind the screen.

Leave a Comment